NOVEDADES / NEWS

03/22/2018 - A Kickstarter Campaign on my own: "Chicharra, from paper-model to 3D Scenery"
You probably remember the very old Chicharra Ornithopter, if you do, man! you were lurking around for a very long time!
I've been playing around with the idea of making a small Hopper for 28mm gaming, and after some tries and some errors, I finally decided to give the old chicharra a new try, just like happened with the Chickenhawk I've reworked for Antenociti's Workshop.
I've spent a lot of time on it, and finally I decided to start at last a Kickstarter campaign on my own, and... you can see how it goes (or how it went) by clicking on the image below.
22/03/2018 - Por fin un Kickstarter propio: "Chicharra, de recortable a escenografía 3D".
Probablemente recuerdes el antiquísimo Chicharra Ornithopter, si es así... ¡tio! ¡llevas ya un tiempo dejándote caer por mi página!
Estuve dándole vueltas a la idea de diseñar un "hopper" para los juegos de miniaturas y tras varios intentos y varios fallos, finalmente me decidí por insuflarle nueva vida al viejo Chicharra, al igual que le pasó al Chickenhawk con el modelo en resina que hice y que tiene a la venta Antenociti's Workshop.
Le dediqué bastante tiempo y finalmente me decidí a empezar una campaña de Kickstarter por mi cuenta, y... ahora podéis ver cómo va (o cómo ha ido) pinchando en la imagen.

5/9/2015 - Not dead... just not updating :( But in 3D!
Many time has passed since the last time I didn't updated the site, about a year and a quarter, and that's too much for sure. I've been this time inmersed in various projects apart from working, and one of the most interesting was all related to 3D printing. I've made some ships and other models for FFG's X-Wing Game, I've made the Senator's shuttle for the basic game and container transport, containers and the infamous Stormtrooper transport from the old PC games that really look gorgeus. You can still get them from my shapeways shop. Apart from the models itself, you can find all you need to play with them at BoardGameGeek, HERE and HERE.
I've been doing a technical piece for the Magpul-PDR Airsoft Gun, a grip extension that allows the use of a bigger battery, you can check it HERE. Magpul released later an official piece similar to this, but I really prefer mine! :D
3D printing has given BIG steps past two years, and not only about printing for games and such.
. This post is over, I hope I'll be updating the site with more things (yes there are more!).
9/5/2015 - No estaba muerto, estaba de parranda... ¡en 3D!
Hace que no actualizo la página ni se sabe, muchísimo, bueno, si se sabe, lo pone en la noticia anterior, hace año y cuarto. En este tiempo han pasado muchas cosas y me he metido en unos cuantos proyectos, uno de los mas interesantes ha sido el relacionado con la impresión 3D. Básicamente unas pocas naves para el juego X-Wing de FFG, el transporte del Senador del juego y los contenedores, el transporte de contenedores y el transporte de asalto de Stormtroopers que quedaron bastante bien, y que se pueden conseguir en mi tienda de Shapeways. Además de las naves, que por si solas no hacen mucho, subí los complementos necesarios para jugar, los puedes encontrar en BoardGameGeek AQUI y AQUI.
También me metí con una pieza para la réplica de Airsoft MAGPUL-PDR, una ampliación del pistolete que además permite el uso de una batería de mayor tamaño, la podéis ver AQUI. Magpul sacó mas tarde una pieza similar, pero yo prefiero la mía de largo :D
La impresión 3D está experimentando avances muy rápido, y no solo para el mundo de los juegos.
No os cuento mas, a ver si sigo actualizando la web con las cosas del año.

02/13/2014 - New gaming mats.
A long time ago I made a couple of gaming mats, one for X-Wing Miniatures that you can print and build at home, and the other one for general medieval wargaming, it was made for Tercio Creativos's 1650 / Dies Irae game and you should print it using some professional service (be it paper or canvas).
They're somehow old but I think you'll find them pretty usefull.
13/02/2014 - Nuevos tableros de juego.
Hace tiempo hice un par e tableros de juego, uno para X-Wing Miniatures que se puede imprimir y montar en casa, y el otro para juegos medievales de miniaturas, fue realizado para el juego 1650 / Dies Irae de Tercio Creativo y viene preparado para imprimirse en un servicio de imprenta profesional (papel o loneta).
Son algo antiguos pero creo que les podréis sacar provecho.

02/08/2014 - Almost all sections up again...
As the tittle says... almost all sections are finished, I'm pretty sure you don't really need back again all the LARP photos, so they went last.
On the bright side, you can get some little new bits... new images in the Art section and the Dungeon Twister Vassal module.
08/02/2014 - Casi todo terminado...
Como dice el titular... casi todas las secciones están terminadas, estoy seguro que no os corre prisa tener a mano las fotos de los REVs, así que estas se quedan para el final.
El lado bueno es que tenéis algunas cosillas nuevas... nuevas imágenes en la sección artística y el módulo para Vassal de Dungeon Twister.

02/01/2014 - Rebooting the site.
No, you didn't go to the wrong site, you're now at TopoSolitario.com
Long story short... Last time I updated the site was at December 2013... that is, three very long years ago. These years I've had to keep aside the site and the "hobby".
I've been out of sight becouse I changed my regular job, which took almost all my spare time, and I've had some personal issues too that "helped" me being lost for a while. The worst part is not only being out of time, but not having willpower enough to stay on the edge of doing and publishing stuff.
Anyway, thanks to you (not me, as I abandoned the site long ago) it still have a lot of visits daily, and paper model downloads and general visits to the workshop section are still pretty high, which is great.
01/02/2014 - Rebotando la página.
No, no te has equivocado de URL, acabas de entrar en TopoSolitario.com
Seré breve... la última vez que actualicé la página fue en Diciembre de 2010... es decir, hace tres larguísimos años en los que tristemente he tenido que dejar descuidadísimo tanto el site como "el hobby".
Esta ausencia atiende básicamente a un cambio de trabajo que se me ha llevado prácticamente todo el tiempo libre y algunas movidillas personales que tampoco vienen al caso pero que también han hecho mella. Lo peor es que además de no tener tiempo, tampoco he tenido ganas de seguir "en la cresta de la ola".
Aunque gracias a todos vosotros y pese al abandono por mi parte, la página se ha seguido manteniendo con un muy respetable número de visitas diarias y con las descargas de recortables on fire, ¡así que genial!


Short term plannig is to keep updating the sections of the site that are still under construction, and slowly add all the stuff (not much really) I've been working at these last years... basically I've to update with some new printable gaming mat (some pretty simple), some art and graphics (nothing usefull by the way) and info about 3D printable models that you probably saw in other sites (BoardGameGeek or ArniesAirsoft).

And, why spending time updating the site look and feel? becouse previous layout was 11 years old, and was built wrongly, not using CSS properly, making any change to styles and layout almost impossible. Now it's done in CSS3 and HTML5, and any big change, including adding and removing sections is much easier.
The target is to focus the site on the "workshop" and all the papermodels, gaming mats, tutorials and the other stuff you love, and having all that content both in english and spanish.
Los planes a corto plazo son ir actualizando las secciones de la página que faltan por actualizar e ir incluyendo las pocas cosas en las que si he podido avanzar estos años... básicamente algún otro suelo para imprimir (muy sencillo), algunas ilustraciones (que poco os pueden aportar) y el tema de modelos 3D imprimibles que seguramente hayáis visto en otros medios (BoardGameGeek o ArniesAirsfot).

¿Y por qué había que cambiar la página? porque la otra tenía ya 11 añazos y estaba contruida de una forma que cualquier cambio de estilo era imposible, ahora esto está hecho en CSS3 y HTML5 lo que facilita cualquier cambio radical y hace mas manejable el menú izquierdo.
El objetivo del nuevo site es enfocarse principalmente al "workshop", con sus recortables, tableros, tutoriales y todo el contenido que os gusta, y que todo el contenido esté en inglés y español.